Bite ball valves AquaGlobe

• Bite ball valves for pigs and cattle
• An innovative and cost saving drinking system
• Savings with bite ball valves
• Water spillage investigation
• Anatomically designed
• Hygienic drinking system
• Reliable and durable quality

Brass/stainless steel valves

Picture	For	Length	Pipe
	piglets < 30kg	66mm	1/2"
	pigs < 110kg calves < 160kg	79mm	1/2"
	sows	79mm	1/2"
	sows cattle < 300kg	97mm	3/4"
	sows cattle < 300kg	97mm	1/2"

One piece stainless steel valves

Picture	For	Length	Pipe
	pigs < 110kg calves < 160kg	75mm	1/2"
	sows	75mm	1/2"

Description

An innovative and cost saving drinking system. We all know the high costs associated with water spillage. Depending on the water system being used spillage can be reduced with up to 40% or more. The installation of AquaGlobe bite ball valves will lower spillage and therefore pay for itself in a short time. The valves ball is placed far enough from the outlet of the valve, which means that the animal has to take the valve fully into its mouth before water can be released. The capacity of the valve is also adapted to the animals’ drinking requirements and water can not be released by the animals’ scratching themselves on the valves. All in all, this will reduce water spillage, thus giving a better stable environment - lowering your wastage disposal and water spillage costs.

Savings with bite ball valves. The valves ball is placed far enough from the outlet of the valve, which means that the animal has to take the valve fully into its mouth before water can be released. The capacity of the valve is also adapted to the animals’ drinking requirements and water can not be released by the animals’ scratching themselves on the valves. All in all, this will reduce water spillage, thus giving a better stable environment - lowering your wastage disposal and water spillage costs.

The Swedish Institute of Agricultural and Enviromental Engineering (JTI) has made a study comparing the AquaGlobe bite ball valve with the conventional type of bite valve. The study shows that the water spillage is 1,6 l/animal a day with the bite ball valve and 2,7 l/animal a day with the conventional bite valve. In other words the spillage is 40% less with the bite ball valves. The total water usage is 6,2 and 8,5 l/animal a day with a difference of 2,3 l/animal a day. The total production result when looking at growth and feed consumption is the same for both systems. From an economical point of view the water spillage is of great importance. The difference in total water usage would for a stable with 300 pigs be about 200 m³ less water to take care of. The saving in cost for storing and spreading of this water is 800 - 2000 EUR per year (4 - 10 EUR/m³). On top of that there is a lower cost for less fresh water with 100 - 140 EUR per year (1 - 1,4 EUR/m³) according to the local water cost. A lower water consumption also gives a better stable environment. JTI Report 2023 (273.4 kB eng) The bite ball valves have been compared to conventional valves. The study is made by the George Morris centre in Canada. A summery of this test is downloadable below. George Morris Centre Report (1,896.1 kB eng)

Anatomically designed. Bite valves should be designed according to the animal’s anatomy. It should be natural for the animal to grasp the valve into its mouth. The AquaGlobe bite ball valve has a round design and a pressed tip, which slows down the water speed and makes it natural for the animal to drink efficiently. Because of the ball and how it is placed, it is very easy for the animal to learn to drink quickly.

Hygienic drinking system. Hygiene and water quality are important factors for the production result. It is necessary that every surface on the valve is used and that it is fully accessible by the animal, so that bacterial growth can be avoided. Drinking bowls and other types of valves invite bacterial growth. The AquaGlobe bite ball valves guarantee maximum hygiene.

Reliable and durable quality. The unique ball design makes the valve self-cleaning and the big screen efficiently prevents problems caused by particles in the water. Since bite valves take a lot of abuse, all moving parts are made in high quality stainless steel.

Mounting

Trainer valve for piglets

It is very important that the piglets locate the water and start to drink as fast as possible. AquaGlobe has for this purpose developed new trainer valves to accomplish fast learning. The valves has a screw that easily can be adjusted to drip. When the piglets have located the water and started to drink, the screw can be adjusted back to stop the dripping.